• HIFI Audio Optical Transceiver

        ● RV6X4-2A         2-ch unidirectional HIFI
        ● RV6X4-4A         4-ch unidirectional HIFI
        ● RV6X4-4A-1U    4-ch unidirectional HIFI-1U
        ● RV6X4-8A         8-ch unidirectional HIFI
        ● RV6X4-2A-2BA   2-ch bidirectional HIFI
        ● RV6X4-4A-4BA   4-ch bidirectional HIFI

        ● Compact design with 1U height
        ● XLR interface for Audio
        ● SNR is better than 92dB
        ● 192K sampling frequency
        ● 24 bit quantized accuracy
        ● Provides AC110~220V dual power redundancy

      • SDI Converter

        ● 75ΩBNC connector for SDI input and looping out
        ● VGA output interface
        ● Two unbalanced RCA audio output with 600Ω impendence...

        ● Features 1 VGA input, 2 audio inputs and 1 SDI output
        ● Supports asymmetrical conversion for any format
        ● The input and output video format can be shown on the screen...

        75Ω BNC connector for SDI input and looping out

        ● HDMI output interface

        ● Two unbalanced RCA audio output with 600Ω impendence...

      • SDI Distribution Amplifier

      • 4U Rack Mounting Chassis

        ● 19 inch and 4U height
        ● 16 traffic card slots and 1 management card slot
        ● 3 fans embedded
        ● Dual power supplies for power redundant protection
        ● Provides one RS232 management interface(CONSOLE) used for CLI management...

      • HD-SDI Surge Protector

        and Pattern Generator

        ● Multi-level protection, low residual voltage
        ● Short response time   
        ● Large thermal capability and low limiting voltage
        ● Stable performance and long service life...

        ● Comply with SMPTE-424M 3G-SDI, SMPTE-292M HD-SDI and SMPTE-259M SD-SDI standard
        ● Support 1080P@59.94/29.97, 1080I@59.94, 720P@59.94, 525I@59.95 format of NTSC...

      • Fiber Optic Intrusion Detection System

      • Fiber Optic Intrusion Detection System Solution

      • Fiber Optic Intrusion Detection System Classic Case Series

      • Fiber Optic Intrusion Detection System Video Introduction

      • CHIP

      • Multi-Service Access Platform

        3U height, 19 Inch width standard, 9 card slots.

        Up to 2 GE optical ports and 2 GE electrical ports

        Aggregate the 1000M Ethernet traffic from up to 3 downlink cards...

        ● 7U height, 19 Inch width standard, 16 card slots.

        ● Up to 4 GE optical ports and 4 GE electrical ports.

        ● Each card can aggregate the 1000M Ethernet traffic from up to 8 downlink cards...

      • Converter

      • Compact SDH

      • Compact PDH

      • Channelized Industrial Ethernet switch

        Optical interface
        ● Two optical interfaces; SFP optical module (LC interface); Hot plugging...
        Ethernet interface
        ● RP105SA:One fiber and two copper Gigabit Ethernet interfaces
        ● RP106: Four fast Ethernet interfaces...

IMG_20150902_123307
F3C6688354D4A2238B8AF63F14F15B9F.jpg
IMG_20150902_111621

School solutions

Vibration optical cable system is an important part of the current campus security system. It uses modern electronic technology equipment, through the use of advanced technology, to create a safe, good and orderly working environment for the campus. When the alarm system of vibration optical cable is installed...

● Download the password, please consult customer service

  •  

     

     

     

    Vibration optical cable system is an important part of the current campus security system. It uses modern electronic technology equipment, through the use of advanced technology, to create a safe, good and orderly working environment for the campus. When the alarm system of vibration optical cable is installed, the detector in the area will be triggered when the thief or other personnel attempt to cross the fence, and the anti-theft alarm host in the security center will immediately give an alarm to remind the security personnel of their attention, so as to realize the ability of "civil air defense plus technical defense, safety net deployment" and rapid handling of emergencies.

    The purpose of setting up a perimeter alarm system around the school is to establish a safe and reliable environment, prevent the entry of non staff outside the school, and prevent illegal reading of walls or windows. The perimeter warning system we designed for the school is to strengthen the management of the school perimeter, prevent illegal personnel from entering the campus through the window, make the security guard more easily know the incident area through the electronic map, and reduce the work difficulty of the school security.

    Rf960 intrusion detection system (also known as vibration optical cable perimeter alarm system) is an optical fiber vibration intrusion detection product designed and developed based on the principle of laser interference. Its vibration sensing optical cable can be laid along the fence, enclosure (referred to as hanging network) or underground. When there is an intrusion or damage event, the system will immediately give an alarm. In addition, the product can resist the interference of natural factors such as wind and rain, and is not affected by electromagnetic, lightning, radio signals, etc., with high reliability and easy maintenance.

    System topology

    Rf960 intrusion detection system consists of rf960 intrusion detection host, defense area divider, sensing optical cable, guiding optical cable, PC and system management software. Users can choose 4-16 defense zones, and the maximum cable length supported by each defense zone can reach 1km.

    学校

    0

Other  Products

PRODUCTS

Contact us