• HIFI Audio Optical Transceiver

        ● RV6X4-2A         2-ch unidirectional HIFI
        ● RV6X4-4A         4-ch unidirectional HIFI
        ● RV6X4-4A-1U    4-ch unidirectional HIFI-1U
        ● RV6X4-8A         8-ch unidirectional HIFI
        ● RV6X4-2A-2BA   2-ch bidirectional HIFI
        ● RV6X4-4A-4BA   4-ch bidirectional HIFI

        ● Compact design with 1U height
        ● XLR interface for Audio
        ● SNR is better than 92dB
        ● 192K sampling frequency
        ● 24 bit quantized accuracy
        ● Provides AC110~220V dual power redundancy

      • SDI Converter

        ● 75ΩBNC connector for SDI input and looping out
        ● VGA output interface
        ● Two unbalanced RCA audio output with 600Ω impendence...

        ● Features 1 VGA input, 2 audio inputs and 1 SDI output
        ● Supports asymmetrical conversion for any format
        ● The input and output video format can be shown on the screen...

        75Ω BNC connector for SDI input and looping out

        ● HDMI output interface

        ● Two unbalanced RCA audio output with 600Ω impendence...

      • SDI Distribution Amplifier

      • 4U Rack Mounting Chassis

        ● 19 inch and 4U height
        ● 16 traffic card slots and 1 management card slot
        ● 3 fans embedded
        ● Dual power supplies for power redundant protection
        ● Provides one RS232 management interface(CONSOLE) used for CLI management...

      • HD-SDI Surge Protector

        and Pattern Generator

        ● Multi-level protection, low residual voltage
        ● Short response time   
        ● Large thermal capability and low limiting voltage
        ● Stable performance and long service life...

        ● Comply with SMPTE-424M 3G-SDI, SMPTE-292M HD-SDI and SMPTE-259M SD-SDI standard
        ● Support 1080P@59.94/29.97, 1080I@59.94, 720P@59.94, 525I@59.95 format of NTSC...

      • Fiber Optic Intrusion Detection System

      • Fiber Optic Intrusion Detection System Solution

      • Fiber Optic Intrusion Detection System Classic Case Series

      • Fiber Optic Intrusion Detection System Video Introduction

      • CHIP

      • Multi-Service Access Platform

        3U height, 19 Inch width standard, 9 card slots.

        Up to 2 GE optical ports and 2 GE electrical ports

        Aggregate the 1000M Ethernet traffic from up to 3 downlink cards...

        ● 7U height, 19 Inch width standard, 16 card slots.

        ● Up to 4 GE optical ports and 4 GE electrical ports.

        ● Each card can aggregate the 1000M Ethernet traffic from up to 8 downlink cards...

      • Converter

      • Compact SDH

      • Compact PDH

      • Channelized Industrial Ethernet switch

        Optical interface
        ● Two optical interfaces; SFP optical module (LC interface); Hot plugging...
        Ethernet interface
        ● RP105SA:One fiber and two copper Gigabit Ethernet interfaces
        ● RP106: Four fast Ethernet interfaces...


RF970_V2 Pinpoint Location Fiber Intrusion Detection System

Raycom's RF970_V2 is a Positioning type Fiber Intrusion Detection System(PFIDS) designed for long distance perimeters. It delivers real-time monitoring and precise positioning capabilities to quickly detect and locate threat behaviors, enabling prompt intervention to prevent illegal activities.

● Download the password, please consult customer service

  • pdf





         Raycom's RF970_V2 is a Positioning type Fiber Intrusion Detection System(PFIDS) designed for long distance perimeters. It delivers real-time monitoring and precise positioning capabilities to quickly detect and locate threat behaviors, enabling prompt intervention to prevent illegal activities. 
         The system adopts a split design, comprising the RF970_V2A alarm host and the RF970_V2B control host. RF970_V2A provides A and B dual channel design, each channel occupies 3 cores of fiber,it allows adaptable laser power settings to suit varied cable lengths, ensuring thorough and continuous security monitoring of fiber optics. RF970_V2B control unit boasts powerful hardware to efficiently run complex algorithms, enabling the RF970 system to promptly detect and locate intrusions.
         The RF970_V2 adopts distributed laser interference sensing technology with independent intellectual property rights, brings extremely high detection sensitivity and response speed. Based on the unique real-time polarization state control techniques, it ensures the stability and consistency of positioning accuracy. With multi-core detector synchronous operation technology (Patent pending,Patent No.: 202410042808.X), the system can flexibly set alarm parameters, effectively eliminating environment nuisance alarm. 

          Furthermore, the RF970_V2 allows automatic learning critical physical and alarm parameters in the field, which effectively simplifies the process of project opening, helping customers monitor and protect assets against illegal incursion in warehouses, airports, military area, border, etc.

    ■     Standards
          √ GB 10408.1、GB/T 10408.8、GB 16796

          √ GA/T 1217、GA/T 1469

    ■     With A/B dual-channel design, supports fiber cable up to 20km per channel.

    ■     With different power laser, support a variety of detection distance, improve the cost performance.
    ■     The entire perimeter can be arbitrarily divided into multiple zones by software
    ■     Calculate and indicate the location of intrusion event on map
    ■     The pin point location accuracy can be within a range of ±1meter*
    ■     Continuously monitor and detect intrusion events in real time
    ■     Supports various alarm types including intrusion, cutting, power off, and tamper alarms, with a rapid response time of less than one second.
    ■     Locate multiple intrusion points simultaneously
    ■     Supports both above ground and under ground application
    ■     Detect behaviors of climbing over,cutting and sabotage
    ■     Supports wave or straight cable deployment
    ■     Provides anti-disturb ability to minimize environment nuisance alarm
           √ Be immune to small animals
           √ Be immune to 7~8 level of wind
           √ Be immune to downpour
    ■     Support 8-ch contact input and 8-ch contact output
    ■     Supports external expansion for contact input and output
    ■     Supports TCP/IP MODBUS protocol,achieves slave function 
    ■     Supports RS232 interface to connect with 2G/3G module,achieve wireless alarm 
    ■     System management
           √ Provides Level-1 Web management, which is designed to manage single RF970 and offers both digital map (GIS map) and hand drawn map for map location,alarm management, video linkage, parameter configuration, etc
           √ Provides a Level-2 web management platform that enables the management of multiple RF970 and other zone type fiber fences.
           √ Provides SDK interface for easy integration with 3rd party platform

    ■     The outdoor terminal adopts ABS engineering plastics with IP68 level
           √ Adopts passive component
           √  Ambient working temperature:-40~85℃

    ■     RF970_V2A alarm host
           √ Embedded laser module and photoelectric conversion module
           √ ESD and surge protection circuits inside,immune to lightning strikes and EMI events
           √ Dual 220V AC power supply with redundant protection, input voltage: 100V - 240V
           √  Maximum device power consumption is less than 60W
           √  Ambient working temperature: -10°C ~ +55°C
           √ The aluminum extrusion chassis has an IP21 level of protection
           √ 19”2U height rack with the depth of 350mm
    *Note:The RF970_V2 had achieved ±1-meter pin point location accuracy in lab tests conducted by a national quality inspection agency using glass bead simulations. However, the pin point location accuracy is around ±5 meters due to diverse environmental and operational factors in practical deployments. 


  • 0

    * All images and content it is forbidden to steal and copy website.

Other  Products


Contact us