• HIFI Audio Optical Transceiver

        ● RV6X4-2A         2-ch unidirectional HIFI
        ● RV6X4-4A         4-ch unidirectional HIFI
        ● RV6X4-4A-1U    4-ch unidirectional HIFI-1U
        ● RV6X4-8A         8-ch unidirectional HIFI
        ● RV6X4-2A-2BA   2-ch bidirectional HIFI
        ● RV6X4-4A-4BA   4-ch bidirectional HIFI

        ● Compact design with 1U height
        ● XLR interface for Audio
        ● SNR is better than 92dB
        ● 192K sampling frequency
        ● 24 bit quantized accuracy
        ● Provides AC110~220V dual power redundancy

      • SDI Converter

        ● 75ΩBNC connector for SDI input and looping out
        ● VGA output interface
        ● Two unbalanced RCA audio output with 600Ω impendence...

        ● Features 1 VGA input, 2 audio inputs and 1 SDI output
        ● Supports asymmetrical conversion for any format
        ● The input and output video format can be shown on the screen...

        75Ω BNC connector for SDI input and looping out

        ● HDMI output interface

        ● Two unbalanced RCA audio output with 600Ω impendence...

      • SDI Distribution Amplifier

      • 4U Rack Mounting Chassis

        ● 19 inch and 4U height
        ● 16 traffic card slots and 1 management card slot
        ● 3 fans embedded
        ● Dual power supplies for power redundant protection
        ● Provides one RS232 management interface(CONSOLE) used for CLI management...

      • HD-SDI Surge Protector

        and Pattern Generator

        ● Multi-level protection, low residual voltage
        ● Short response time   
        ● Large thermal capability and low limiting voltage
        ● Stable performance and long service life...

        ● Comply with SMPTE-424M 3G-SDI, SMPTE-292M HD-SDI and SMPTE-259M SD-SDI standard
        ● Support 1080P@59.94/29.97, 1080I@59.94, 720P@59.94, 525I@59.95 format of NTSC...

      • Fiber Optic Intrusion Detection System

      • Fiber Optic Intrusion Detection System Solution

      • Fiber Optic Intrusion Detection System Classic Case Series

      • Fiber Optic Intrusion Detection System Video Introduction

      • CHIP

      • Multi-Service Access Platform

        3U height, 19 Inch width standard, 9 card slots.

        Up to 2 GE optical ports and 2 GE electrical ports

        Aggregate the 1000M Ethernet traffic from up to 3 downlink cards...

        ● 7U height, 19 Inch width standard, 16 card slots.

        ● Up to 4 GE optical ports and 4 GE electrical ports.

        ● Each card can aggregate the 1000M Ethernet traffic from up to 8 downlink cards...

      • Converter

      • Compact SDH

      • Compact PDH

      • Channelized Industrial Ethernet switch

        Optical interface
        ● Two optical interfaces; SFP optical module (LC interface); Hot plugging...
        Ethernet interface
        ● RP105SA:One fiber and two copper Gigabit Ethernet interfaces
        ● RP106: Four fast Ethernet interfaces...

1
RF960-4前600
RF960-4后600

RF960-4 4-zone Fiber Optic Intrusion Detection System

The RF960-4 is a 4-zone Fiber Optic Intrusion Detection System designed to detect intrusions into the perimeters and borders on the basis of the principle of laser interference. It adopts optical fiber vibration sensing technology, to detect and notify any intrusion attempt such as climbing, cutting sabotage the fence or disassembles the system.

● Download the password, please consult customer service

  • 999999999999999

     

     


    Overview 

        The RF960-4 is a 4-zone Fiber Optic Intrusion Detection System designed to detect intrusions into the perimeters and borders on the basis of the principle of laser interference. It adopts optical fiber vibration sensing technology, to detect and notify any intrusion attempt such as climbing, cutting sabotage the fence or disassembles the system. Furthermore, it has strong anti-disturb ability to eliminate environment nuisance alarms and can be immune to electromagnetic interference, lightning and storms.
    The RF960-4 system is composed of RF960-4 host and several passive terminals. The host adopts 19 inch standard
    chassis, every two zones corresponds to an optical output interface and 2 optical input interfaces. By default, RF960-4 supports 4 contact closure alarm outputs, the contact closure output can be extended and contact closure input can be also supported by choosing auxiliary card (declared before order). It is suitable for complex terrain, ammunition depots, ware houses, inflammable or explosive areas.

    Features 

        19 inch standard chassis
        Support up to 4 zones.
        Optical fiber length is up to 1000m.
    ■    Uses normal optical fiber cable (GYXTW).
        Fiber optics can be installed on wire net or underground. 
        Supports 4 contact closure alarm outputs, the contact closure output can be extended and contact closure input can be also supported by choosing auxiliary card (declared before order).
        Supports video linkage supervision
        Detect behaviors of climbing, cutting, and sabotage.
        Alarm responding time is less than 3 seconds
        Supports external 2G/3G/4G wireless module for remote alarm 
        Easy for installation and debugging, and supports remote parameter adjustment
        Supports intrusion data replayed
        Supports parameters adjustment to filter nuisance alarm and missing reports 
        Automatic adapted to the wind, rain and other changes in the external environment
        ESD and surge protection circuits inside, which is immune to electromagnetic interference, lightning damage
        Adopts 220V AC/50Hz power supply with power consumption of less than 8W
        Ambient working temperature: -40℃ ~ +70℃.
        Supply software RFVIEW-W that offers graphical interface for optical fiber fence daily operation. 
        The passive terminals adopt ABS engineering-plastics enclosure that is designed to be waterproof, resistant to pressure, corrosion, and weather extremes.
    Application
    As shown in Figure 1, the RF960-4 host, installed in the central office, located at one terminal of all zones. 

    The 1 piece of 8 core fiber cable are deployed, extending to one direction one by one. Each cable connects can arrange four zones.

     

    As shown in figure 2 shows, from the central office, the optical fiber buses extend toward to both sides. Each fiber cable can deploy 2 zones. 

    In some application, we can use the connection with only one optical cable. It adopts one 8-core optical fiber cable, one RFM007-G, two RFM003-G, one RFM009-G and one RFM001-G.

  • 0

    * All images and content it is forbidden to steal and copy website.

Other  Products

PRODUCTS

Contact us