RC7883A1 is a low price product designed on the basis of RC7880A1, The core design and package of RC7883A1 is the same with that of RC7880A1. RC7883A1 provides three kinds of application modes: TM mode, PHY mode and MAP mode. The three modes can be configured by register.
RC7880A1 is a monolithic SDH Add/Drop multiplexer which multiplexes 24 E1s to dual STM-1 optical line interfaces. With a few external components, the STM-1 ADM equipment can be realized. RC7880A1 can be used as a Customer Premises Equipment (CPE), an Add-Drop-Multiplexer (ADM) or Multi-Service Access platform equipment (MSAP) to build various transmission networks.
The RC7017A2 is a mixed multiplexer, which integrates a PDH optical terminal and a 100BASE-FX Ethernet PHY transceiver. It transmits and receives 8 E1 and 100M full-speed full-duplex Ethernet data through a pair of optical fiber, and provides two Pseudo-CML (PCML) optical device interfaces to support optical protect switching.
Targeted at ADM applications, the RC7020 multiplexes a Gigabit Ethernet line with 88 E1 lines over a 1.25Gb/s optical fiber. The RC7020 provides dual 1.25Gb/s optical ports and dual GMII interfaces for interfacing to external switches. E1 and Ethernet traffic are protected with rapid protection switching in a ring network topology when a fault occurs. The RC7020 incorporates an HDLC controller ...
The RC7222A2 is a highly integrated ASIC chip for data conversion from 10M/100M Ethernet and ST_BUS to WAN interfaces (E1/FE1, or SSI*). It supports E1/FE1 and MII interfaces that follow ITU-T standards.
The RC7235A2 is the updated revision of RC7235, and can be applied to E1 fiber modem, multi-service fiber modem, multi-service E1 converter or multi-service ST-BUS converter. The RC7235A2 has V.35/FE1/STDW-BUS/HDLC interface on user port and optical/E1/ST-BUS interface on line port. The STDW-BUS interface can realize data and voice complex access. The RC7235A2 provides two configuration modes...
RC6116 is a highly integrated device implements Ethernet frame transmission over 1～16 E1 links. Compliant to international standards, the device can communicate with products from other manufacturers adopting the same standards.
RC6400 is a highly integrated EOS device that provides for mapping of 4 Ethernet ports into SDH transport payloads. Complying with ITU-T standards, RC6400 adopts GFP-F encapsulation, low-order virtual concatenation (VCAT) and link capacity adjust scheme (LCAS). The device can communicate with products from other manufactures adopting the same standards.
The RC6630A1 is designed to aggregate Ethernet traffic from 16 directions through TDM networks. The 16 physically isolated VCG (Virtual Container Group) correspond to 16 remote terminals. RC6630A1 can be configured as EoPDH mode or EoS mode, and the container is E1 for EoPDH and VC-12 for EoS respectively. and the bandwidth of each VCG can be configured...
RC6105 is a highly integrated device implements Ethernet frame transmission over 1～5 E1 links. Compliant to international standards, the device can communicate with products from other manufacturers adopting the same standards.
Raycom Co., Ltd is a high-tech company, designer and manufacturer, mainly engaged in both surveillance fields and telecom. With decades of research and development, our products of Fiber Optical Fence, SDI optical transceiver, converters, SDH, PDH, Ethernet & Optical transmission system, PCM Multi-service optical terminal have been exported to worldwide.