• HIFI Audio Optical Transceiver

        ● RV6X4-2A         2-ch unidirectional HIFI
        ● RV6X4-4A         4-ch unidirectional HIFI
        ● RV6X4-4A-1U    4-ch unidirectional HIFI-1U
        ● RV6X4-8A         8-ch unidirectional HIFI
        ● RV6X4-2A-2BA   2-ch bidirectional HIFI
        ● RV6X4-4A-4BA   4-ch bidirectional HIFI

        ● Compact design with 1U height
        ● XLR interface for Audio
        ● SNR is better than 92dB
        ● 192K sampling frequency
        ● 24 bit quantized accuracy
        ● Provides AC110~220V dual power redundancy

      • SDI Converter

        ● 75ΩBNC connector for SDI input and looping out
        ● VGA output interface
        ● Two unbalanced RCA audio output with 600Ω impendence...

        ● Features 1 VGA input, 2 audio inputs and 1 SDI output
        ● Supports asymmetrical conversion for any format
        ● The input and output video format can be shown on the screen...

        ● 75Ω BNC connector for SDI input and looping out

        ● HDMI output interface

        ● Two unbalanced RCA audio output with 600Ω impendence...

      • SDI Distribution Amplifier

      • 4U Rack Mounting Chassis

        ● 19 inch and 4U height
        ● 16 traffic card slots and 1 management card slot
        ● 3 fans embedded
        ● Dual power supplies for power redundant protection
        ● Provides one RS232 management interface(CONSOLE) used for CLI management...

      • HD-SDI Surge Protector

        and Pattern Generator

        ● Multi-level protection, low residual voltage
        ● Short response time   
        ● Large thermal capability and low limiting voltage
        ● Stable performance and long service life...

        ● Comply with SMPTE-424M 3G-SDI, SMPTE-292M HD-SDI and SMPTE-259M SD-SDI standard
        ● Support 1080P@59.94/29.97, 1080I@59.94, 720P@59.94, 525I@59.95 format of NTSC...

      • Fiber Optic Intrusion Detection System

      • Fiber Optic Intrusion Detection System Solution

      • Fiber Optic Intrusion Detection System Classic Case Series

      • Fiber Optic Intrusion Detection System Video Introduction

      • CHIP

      • Multi-Service Access Platform

        ● 3U height, 19 Inch width standard, 9 card slots.

        ● Up to 2 GE optical ports and 2 GE electrical ports

        ● Aggregate the 1000M Ethernet traffic from up to 3 downlink cards...

        ● 7U height, 19 Inch width standard, 16 card slots.

        ● Up to 4 GE optical ports and 4 GE electrical ports.

        ● Each card can aggregate the 1000M Ethernet traffic from up to 8 downlink cards...

      • Converter

      • Compact SDH

      • Compact PDH

      • Channelized Industrial Ethernet switch

        Optical interface
        ● Two optical interfaces; SFP optical module (LC interface); Hot plugging...
        Ethernet interface
        ● RP105SA:One fiber and two copper Gigabit Ethernet interfaces
        ● RP106: Four fast Ethernet interfaces...

Raycom Co., Ltd.  was founded in 2000 in Beijing China. At the initial stage of establishment, Raycom is mainly committed to the research and development of large-scale integrated circuits and communication system solutions for telecommunications. Since 2010, Raycom has increased R&D investment in security and image intelligent analysis. We insist on positive thinking and brave innovation, and have formed four competitive product lines including Large Integrated Circuit for Telecom, Communication and Security System Solution, Optical Fiber Intrusion Dectection System and Image Intelligent Analysis Software.


Raycom adheres to the road of independent innovation, technology for survival, innovation for development. By the end of 2019, our R&D team has successfully launched more than 50 large integrated circuits for communication, hundreds of communication equipment and dozens of security equipment, meanwhile obtained 22 national technology patents.


In addition, based on the market demand, Raycom has concentrated on developing a series of intelligent analysis software products that are practical, advanced in algorithm, simple to learn and easy to use, safe and efficient, including HD video intelligent patrol, bayonet image secondary analysis system, and 122 traffic dispatch and command system. The products have been widely used in the transportation system all over China and are well received by users.


Raycom closely follow the needs of customers, and make effort to create more value for customers with the leading technology. Since the establishment of the company, we have nearly 2000 partners in China and established cooperative relations with hundreds of enterprises in southeast Asia, west Asia, Africa, North America, South America and Europe.

With the rapid development of science and technology, Raycom will continue to keep the enterprise spirit of "Innovation, Harmony, God rewards the diligent, faithfulness is like a rock", continue to take the road of innovation and development to create more competitive products.


 

ABOUT US

RF970_V2 Pinpoint Location Fiber Intrusion Detection System
Raycom's RF970_V2 is an advanced fiber-optic intrusion detection system designed for long distance perimeters. It delivers real-time monitoring and precise positioning capabilities to quickly detect and locate threat behaviors, enabling prompt intervention to prevent illegal activities.
¥ 0.00
RF970 Pinpoint Location Fiber Intrusion Detection System
RF970, the precise positioning type fiber-optic intrusion detection system developed by Raycom, achieves real-time monitoring for the long distance fiber perimeter, shows the precise location of the threat , provides information about what event has taken place and give the operator the opportunity to make a timely and proportionate response.
¥ 0.00
RF960-32 32-zone Fiber Optic Intrusion Detection System
The RF960-32 is a 32-zone Fiber Optic Intrusion Detection System designed to detect intrusions into the perimeters and borders on the basis of the principle of laser interference. It adopts optical fiber vibration sensing technology, to detect and notify any intrusion attempt such as climbing, cutting sabotage the fence or disassembles the system.
¥ 0.00
RF960-16 16-zone Fiber Optic Intrusion Detection System
The RF960-16 is a 16-zone Fiber Optic Intrusion Detection System designed to detect intrusions into the perimeters and borders on the basis of the principle of laser interference. It adopts optical fiber vibration sensing technology, to detect and notify any intrusion attempt such as climbing, cutting sabotage the fence or disassembles the system.
¥ 0.00
RF960-8 8-zone Fiber Optic Intrusion Detection System
The RF960-8 is an 8-zone Fiber Optic Intrusion Detection System designed to detect intrusions into the perimeters and borders on the basis of the principle of laser interference. It adopts optical fiber vibration sensing technology, to detect and notify any intrusion attempt such as climbing, cutting sabotage the fence or disassembles the system.
¥ 0.00
RF960-4 4-zone Fiber Optic Intrusion Detection System
The RF960-4 is a 4-zone Fiber Optic Intrusion Detection System designed to detect intrusions into the perimeters and borders on the basis of the principle of laser interference. It adopts optical fiber vibration sensing technology, to detect and notify any intrusion attempt such as climbing, cutting sabotage the fence or disassembles the system.
¥ 0.00
RF900-A Dual-zone Fiber Optic Intrusion Detection System
The RF900-A is a Dual-zone Fiber Optic Intrusion Detection System designed to detect intrusions into the perimeters and borders on the basis of the principle of M-Z laser interference. It adopts optical fiber vibration sensing technology, to detect and notify any intrusion attempt such as climbing, cutting sabotage the fence or disassembles the system.
¥ 0.00
Channelized Industrial Ethernet Switch (RP105SA/RP106)
RP105SA/RP106 is the channel isolated Ethernet switch, supports ring and chain topology over 1.25Gb/s optical fiber. It supports 1+1 optical protection, provides intelligent redundancy for Ethernet network and bring the reliability for the whole network (the network self-healing time is less than 5ms).
¥ 0.00
Fast Ethernet and 4E1 multiplexer (RP102)
RP102 is the compact and high-performance optical transmission equipment based on Application Specific Integrated Circuit (ASIC). It can realize the 4 E1s and a 100Mbps Ethernet data channel transmission over optical line.



¥ 0.00
Gigabit Ethernet and 64E1 to optical fiber multiplexer (RP104)
The RP104 is optical transmission equipment based on Application Specific Integrated Circuit (ASIC)，realizes the 64 E1 and four 1000Mbps Ethernet data channel transmission over optical line of 1.25Gb/s, the four 1000Mbps Ethernet data channel share 1000M bandwidth. In point-to-point mode, the Ethernet transmission bandwidth can be doubled to 2G by setting the port-trunking function.
¥ 0.00
Gigabit Ethernet and 16E1s to optical fiber multiplexer (RP1000)
The RP1000 is optical transmission equipment based on Application Specific Integrated Circuit (ASIC). It integrates the traditional PDH multiplexer and 1000Mbps Ethernet optical transceiver, and can realize the 4/8/16 E1s and four
1000Mbps Ethernet data channel transmission over optical line of 1.25Gb/s, the four 1000Mbps Ethernet data channel share 1000M bandwidth.
¥ 0.00
Simplified Gigabit Ethernet and 16 E1s to optical multiplexer (RP101)
The RP101 is a point-to-point optical transmission equipment based on Application Specific Integrated Circuit (ASIC). It can realize the 4/8/16 E1s and a 1000Mbps Ethernet data channel transmission over optical line of 1.25Gb/s.
¥ 0.00
Multi-service Optical Terminal（RS1030N)
RS1030N is designed as a modular system with two 155Mb/s optical interfaces to provide an ultra-compact, cost-effective and flexible multi-service platform. With optional cards such as E1 card and Ethernet card, it is easy to meet user’s various requirements. It can realize the 4/8/16E1 and 100Mbps Ethernet transmission over optical line.

¥ 0.00
PCM Multi-service Optical Terminal (RS1030)
 RS1030 is designed as a STM-1 level optical terminal with two 155.520Mb/s optical interfaces to provide an ultra-compact, cost-effective and flexible multi-service platform. It can realize the E1 (up to 8E1), V.35, PCM traffic and 100Mbps Ethernet transmission over optical line.
¥ 0.00
63E1 Compact SDH Transmission System (RS1020)
RS1020 is the 63E1 compact STM-1 level Synchronous Digital Hierarchy (SDH) transmission system compatible with ITU-T standard. It is designed as a modular system with two 155.520Mb/s optical interfaces to provide an ultra-compact, cost-effective and high capacity platform. It provides fully cross-connect between all tributaries.
¥ 0.00
Multi-Service SDH Transmission System (RS1010)
RS1010 is the STM-1 level multi-service Synchronous Digital Hierarchy (SDH) transmission system compatible with ITU-T standard. It is designed as a modular system with two 155.520Mb/s optical interfaces to provide an ultra-compact, cost-effective and flexible multi-service platform. With optional cards such as E1 card, Ethernet card and Engineering Order Wire card (EOW).
¥ 0.00
Simplified Ethernet to multi-E1 Converter (RB003)
The RB003 series is the IP over TDM converter, which supports the conversion from MAC frames to 1 – 16 E1 lines. The maximum bit rate is 31.68Mbps (16E1 lines). It not only provides alarms and status of the E1 line and Ethernet interface together with advanced management functions, but also supports the Local/ remote monitor and management via CLI commands. With low power consumption.
¥ 0.00
Gigabit Ethernet to STM-4 Converter (RB006)
RB006 is the compact and high-performance Gigabit Ethernet to STM-4 converter with VLAN TAG function, which provides three gigabit Ethernet interfaces (2 electrical and 1 optical Ethernet interfaces) and 2 STM-4 interfaces. By adopting ITU-T G.7041 and G.7042-compliant EoSDH (Ethernet over SDH) technology, RB006 provides one VCG whose bandwidth can be flexibly configured from 1~8 VC4.
¥ 0.00
Compact Gigabit Ethernet Aggregator (RB009)
RB009 is a Gigabit Ethernet aggregator with inverse multiplexing and VLAN TAG function; it provides three gigabit Ethernet interfaces (2 electrical and 1 optical Ethernet interfaces) compliant with IEEE 802.3 series standard and up to 24 E1 interfaces. It can separate the Ethernet data from GE port (the carried VLAN Tag correspond to different VCG channels), encapsulate them into EoPDH signal.
¥ 0.00
REOP Ethernet to Multi-E1 converter (REOP)
REOP is the IP over TDM converter, which supports the conversion from MAC frames to 1 – 16 E1 lines. The maximum bit rate is 31.68Mbps (16E1 lines). With different LAN card, E1 card and power card, it can meet various requirements. It not only provides alarms and status of the E1 line and Ethernet interface together with advanced management functions, such as, throughput statistic of the Ethernet.
¥ 0.00

WELCOME TO RAYCOM

넳 넲

Products