• HIFI Audio Optical Transceiver

        ● RV6X4-2A         2-ch unidirectional HIFI
        ● RV6X4-4A         4-ch unidirectional HIFI
        ● RV6X4-4A-1U    4-ch unidirectional HIFI-1U
        ● RV6X4-8A         8-ch unidirectional HIFI
        ● RV6X4-2A-2BA   2-ch bidirectional HIFI
        ● RV6X4-4A-4BA   4-ch bidirectional HIFI

        ● Compact design with 1U height
        ● XLR interface for Audio
        ● SNR is better than 92dB
        ● 192K sampling frequency
        ● 24 bit quantized accuracy
        ● Provides AC110~220V dual power redundancy

      • SDI Converter

        ● 75ΩBNC connector for SDI input and looping out
        ● VGA output interface
        ● Two unbalanced RCA audio output with 600Ω impendence...

        ● Features 1 VGA input, 2 audio inputs and 1 SDI output
        ● Supports asymmetrical conversion for any format
        ● The input and output video format can be shown on the screen...

        75Ω BNC connector for SDI input and looping out

        ● HDMI output interface

        ● Two unbalanced RCA audio output with 600Ω impendence...

      • SDI Distribution Amplifier

      • 4U Rack Mounting Chassis

        ● 19 inch and 4U height
        ● 16 traffic card slots and 1 management card slot
        ● 3 fans embedded
        ● Dual power supplies for power redundant protection
        ● Provides one RS232 management interface(CONSOLE) used for CLI management...

      • HD-SDI Surge Protector

        and Pattern Generator

        ● Multi-level protection, low residual voltage
        ● Short response time   
        ● Large thermal capability and low limiting voltage
        ● Stable performance and long service life...

        ● Comply with SMPTE-424M 3G-SDI, SMPTE-292M HD-SDI and SMPTE-259M SD-SDI standard
        ● Support 1080P@59.94/29.97, 1080I@59.94, 720P@59.94, 525I@59.95 format of NTSC...

      • Fiber Optic Intrusion Detection System

      • Fiber Optic Intrusion Detection System Solution

      • Fiber Optic Intrusion Detection System Classic Case Series

      • Fiber Optic Intrusion Detection System Video Introduction

      • CHIP

      • Multi-Service Access Platform

        3U height, 19 Inch width standard, 9 card slots.

        Up to 2 GE optical ports and 2 GE electrical ports

        Aggregate the 1000M Ethernet traffic from up to 3 downlink cards...

        ● 7U height, 19 Inch width standard, 16 card slots.

        ● Up to 4 GE optical ports and 4 GE electrical ports.

        ● Each card can aggregate the 1000M Ethernet traffic from up to 8 downlink cards...

      • Converter

      • Compact SDH

      • Compact PDH

      • Channelized Industrial Ethernet switch

        Optical interface
        ● Two optical interfaces; SFP optical module (LC interface); Hot plugging...
        Ethernet interface
        ● RP105SA:One fiber and two copper Gigabit Ethernet interfaces
        ● RP106: Four fast Ethernet interfaces...

RF970new

RF970 Pinpoint Location Fiber Intrusion Detection System

RF970, the precise positioning type fiber-optic intrusion detection system developed by Raycom, achieves real-time monitoring for the long distance fiber perimeter, shows the precise location of the threat , provides information about what event has taken place and give the operator the opportunity to make a timely and proportionate response.

● Download the password, please consult customer service

  • pdf

     

     

    Overview

       

          Raycom's RF970 is an advanced fiber-optic intrusion detection system designed for long distance perimeters. It delivers real-time monitoring and precise positioning capabilities to quickly detect and locate threat behaviors, enabling prompt intervention to prevent illegal activities.

          RF970 provides A and B dual channel design, each channel occupies 3 cores of fiber,using different power laser emitters to flexibly support a variety of optical cable lengths. Based on the number of channels and combinations of multiple power lasers, RF970 offers multiple models for customers to choose according to different engineering distances.

          The RF970 adopts distributed laser interference sensing technology with independent intellectual property rights, brings extremely high detection sensitivity and response speed. Based on a special and key technology, it guarantees the stability and consistency of measurement accuracy. Equipped with narrow line-width laser source, high speed data acquisition and conversion unit, as well a variety of complex DSP algorithms, it delivers a perfect solution with advanced location accuracy and anti-disturb ability to eliminate environment nuisance alarm.

         Furthermore, the RF970 allows automatic learning key physical parameters in the fields, which effectively simplifies the process of project opening, helping customers monitor and protect assets against illegal incursion in warehouses, airports, military, and other important infrastructures.
    Feature

    ■ Standards

       √ GB 10408.1、GB/T 10408.8、GB 16796

       √ GA/T 1217、GA/T 1469

     Using A,B Dual-channel design, the maximum length of fiber cable 50km for each channel

     With different power laser, support a variety of detection distance, improve the cost performance.

     Calculate and indicate the location of intrusion event on map

     The pin point location accuracy can reach ±1 meter.

     Supports various real-time alarm including intrusion, cutting, power failure, and tamper, with a rapid response time of less than one second.

     Locate multiple intrusion points simultaneously

     Support for both above-ground and underground applications

     Detect behaviors of climbing over,cutting and sabotage

     Supports wave or straight cable deployment

     Provides anti-disturb ability to minimize environment nuisance alarm

       √ Be immune to small animals

       √ Be immune to 7~8 level of wind

       √ Be immune to downpour

     Support 8-ch contact input and 8-ch contact output

     Supports contact closure extension via external standard Ethernet to contact converter

     Supports TCP/IP MODBUS protocol,achieves slave function

     Supports RS232 interface to connect with 2G/3G module,achieve wireless alarm

     System management

       √ Provides Level-1 Web management, which is designed to manage single RF970 host and offers both digital map (GIS map) and hand drawn map for map location,alarm management, video linkage, parameter configuration, etc

       √ Provides a Level-2 web management platform that enables the management of multiple RF970 devices and other Raycom zone type fiber fences.

       √ Provides SDK interface for easy integration with 3rd party platform

     The outdoor terminal adopts ABS engineering plastics with IP68 level

       √ Adopts passive component

       √ Ambient working temperature:-40~85℃

     RF970 alarm host

       √ Based on the Linux operating system, provide the high precision positioning algorithm

       √ Embedded PCIE High speed and high precision data acquisition card

       √ Embedded laser module and photoelectric conversion module

       √ ESD and surge protection circuits inside,immune to lightning strikes and EMI events.

       √ AC~ 220V power supply with consumption less than 150W

       √ Ambient working temperature: -10°C ~ +55°C

       √ The host enclosure has an IP21 level of protection

       √ 19”4U height rack with the depth of 450mm

    Application

Other  Products

PRODUCTS

Contact us