定位型

振动光缆入侵探测系统RF970

敲击定位精度可达±1m

运用高精度入侵定位算法

采用自主知识产权的核心技术

防区型光纤振动入侵探测系统

音视频传输产品

SDI光端机            音频光端机

SDI分配器            SDI转换器      HD-SDI视频4U插箱

收发器解决方案

  • 回到顶部
  • 13601355498
  • QQ客服
  • 微信二维码

Fast Ethernet and 4E1 multiplexer (RP102)

其 他 产 品 展 示

12160409
RP102
  • 999999999999999

     

     

    Overview       

    RP102 is the compact and high-performance optical transmission equipment based on Application Specific Integrated Circuit (ASIC). It can realize the 4 E1s and a 100Mbps Ethernet data channel transmission over optical line.

    With low power consumption, high integration and well stability, RP102 can be used point-to-point, or as the remote of RS7000/RS3000 (MSAP), it is a cost-competitive solution for the application such as the telecommunication, the electric power and the finance fields.

     

    Feature 

     

    • Compact design with 1U height, and can be installed on standard rack
    • Realizes 4 E1s and a 100M wire-speed Ethernet mixed multiplexing to optical fiber
    • Optical interface
    • One optical interface, with the line bit rate of 155Mbps.
    • Provides optical loopback function, a great convenience for trouble shooting.
    • Supports remote power down information sending function.
    • E1 interface
    • Provides 4 E1 interfaces, 75Ω unbalanced, and BNC connector.
    • Jitter tolerance and jitter generation fully comply with ITU-T G.823 recommendations.
    • Supports device loop and E1 line loop for easy testing.
    • Ethernet interface
    • One copper fast Ethernet interface compliant with IEEE802.3 serial standard (RJ45).
    • Supports auto-negotiation, which can work in 100M full/half-duplex, 10M full/half-duplex mode.
    • Accepts frames with length between 64 and 2036 bytes (otherwise filtering).
    • Flow control ability in full duplex mode.
    • Auto MDI/MDX function.
    • Patent technique adopted for Ethernet loop detection.
    • Management
    •  Necessary alarm detection for fault location.
    •  Supports management by RS7000/RS3000.
    •  

    Application

     

    RP102 supports point-to-point application, as Figure 3-1 shows.

     

    img1

     

    Figure 1 Point-to-point Application

     

     

    RP102 can be the remote of RS7000/RS3000 (MSAP equipment), as Figure 3-2 shows. The NMS can monitor and control all RP102 via RS7000.

    NoteThis application is only for the E1 traffic aggregation; Ethernet traffic aggregation is not supported.

     

     

    img2

     

    Figure 2 Remote Application

     

     

     

     

     

     

     

    0
RP102 is the compact and high-performance optical transmission equipment based on Application Specific Integrated Circuit (ASIC). It can realize the 4 E1s and a 100Mbps Ethernet data channel transmission over optical line.

产  品  分  类

电话:13601355498

Q Q :1092671557