■ 19 inch standard chassis
■ Support up to 8 zones.
■ Optical fiber length is up to 1000m.
■ Uses normal optical fiber cable (GYXTW).
■ Fiber optics can be installed on wire net or underground.
■ Supports 8 contact closure alarm outputs, the contact closure output can be extended and contact closure input can be also supported by choosing auxiliary card (declared before order).
■ Supports video linkage supervision
■ Detect behaviors of climbing, cutting, and sabotage.
■ Alarm responding time is less than 3 seconds
■ Supports external 2G/3G/4G wireless module for remote alarm
■ Easy for installation and debugging, and supports remote parameter adjustment
■ Supports intrusion data replayed
■ Supports parameters adjustment to filter nuisance alarm and missing reports
■ Automatic adapted to the wind, rain and other changes in the external environment
■ ESD and surge protection circuits inside, which is immune to electromagnetic interference, lightning damage
■ Adopts 220V AC/50Hz power supply with power consumption of less than 13W
■ Ambient working temperature: -40℃ ~ +70℃.
■ Supply software RFVIEW-W that offers graphical interface for optical fiber fence daily operation.
■ The passive terminals adopt ABS engineering-plastics enclosure that is designed to be waterproof, resistant to pressure, corrosion, and weather extremes.
Application
As shown in Figure 1, the RF960-8 host, installed in the central office, located at one terminal of all zones. The 1 pieces of 8 core fiber cable are deployed, extending to one direction one by one. Each cable connects can arrange four zones.
As shown in figure 2 shows, from the central office, the optical fiber buses extend toward to both sides. Each fiber cable can deploy 2 zones.
In some application, we can use the connection with only one optical cable. It adopts one 6-core or 8-core optical fiber cable, one RFM007-G, two RFM003-G, one RFM009-G and one RFM001-G.